컨텐츠 바로가기

  • 로그인
  • 회원가입
  • 장바구니
  • 주문조회
  • 마이쇼핑
  • 게시판

    이전 제품 보기

    다음 제품 보기

    RODE VIDEOMIC PRO 적립금

    RODE VIDEOMIC PRO 기본 정보
    12시간 대여
    24시간 대여 10,000원
    적립금
    • 0 (0%)
    • 무통장 결제시 적립금( %)
    • 카드 결제시 적립금( %)
    • 실시간 계좌 이체시 적립금( %)
    • 적립금 결제시 적립금( %)
    • 휴대폰 결제시 적립금( %)
    제휴 적립금 네이버 마일리지 적립
    무이자할부
    제조사 자체제작
    원산지
    수량

    updown

    국내/해외배송

    개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

    DSLR 핸디캠 마이크


     

    dslr 핸디캠 마이크


    • Rycote® Lyre® shock mounting onboard
    • All new capsule with lower noise and higher sensitivity
    • Broadcast recording quality condenser microphone
    • Compact form factor (150mm/6” length)
    • Ultra lightweight (85g/3oz)
    • 9V battery powered - over 70 hours use (alkaline)
    • Integrated shock mounting
    • Integrated foam windscreen
    • 3.5mm stereo mini-jack output (dual mono)
    • Two step High Pass Filter (flat, 80Hz)
    • Three position level control (-10dB, 0, +20dB)
    • Camera shoe mount with 3/8” thread for easy boompole mounting
    • 10 year warranty with online registration at www.rodemic.com/warranty

    The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

    At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

    The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

    Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

    Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.

    The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.

    The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.

    The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

    VIDEOMIC PRO 제품 사양
    음향 원리Line Gradient
    액티브 전자 장치JFET impedance converter
    캡슐0.50"
    어드레스 타입End
    주파수 대역40Hz - 20kHz (선택 HPF @80)
    출력 임피던스200Ω
    최대 음압134dB (@1kHz, 1kΩ 부하에서 1% THD(전고조파 왜곡))
    최대 출력 수준6.9dBu (@1kHz, 1kΩ 부하에서 1% THD(전고조파 왜곡)) (@ 1kHz, 1% THD into 1KΩ load)
    민감도-32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    등가 잡음 레벨(A-가중치)14dBA
    등가 잡음 레벨(A-가중치)85g
    등가 잡음 레벨(A-가중치)100mmH x 75mmW x 170mmD

     

    REVIEW

    게시물이 없습니다

    모두 보기 사용 후기 쓰기

    Q&A

    게시물이 없습니다

    모두 보기 상품 Q & A 쓰기


    • notice
    • notice
    • notice